| |
Surveying Tools
Design Requirements
- Requirements for Engineers
- Conveyance Design Requirements, Revision 1, August 2009 (PDF, 202KB)
- Pump Station Design Requirements, Revision 3, August 2009 (PDF, 4.41MB)
- CAD Requirements
- CAD Requirements, Revision 2, August 2009 (PDF, 312KB)
- Border and Title Block, Revision 2, August 2009 (PDF, 166KB)
- Legends and Abbreviations
- Legends and Abbreviations, Revision 2, August 2009 (PDF, 171KB)
- ABBREVIATIONS 1 (DWG, 120KB)
- ABBREVIATIONS 1 (PDF, 1.68MB)
- ABBREVIATIONS 2 (DWG, 100KB)
- ABBREVIATIONS 2 (PDF, 798KB)
- Arch Struc Legend (DWG, 124KB)
- Arch Struct Legend (PDF, 535KB)
- Civil Legend (DWG, 149KB)
- Civil Legend (PDF, 811KB)
- Electrical Legend 1 (DWG, 124KB)
- Electrical Legend 1 (PDF, 1.04MB)
- Electrical Legend 2 (DWG, 128KB)
- Electrical Legend 2 (PDF, 982KB)
- Electrical Legend 3 (DWG, 87KB)
- Electrical Legend 3 (PDF, 490KB)
- Electrical Legend 4 (DWG, 87KB)
- Electrical Legend 4 (PDF, 1.25MB)
- HVAC Legend (DWG, 153KB)
- HVAC Legend (PDF, 671KB)
- Instrumentation Legend 1 (DWG, 115KB)
- Instrumentation Legend 1 (PDF, 974KB)
- Instrumentation Legend 2 (DWG, 136KB)
- Instrumentation Legend 2 (PDF, 850KB)
- Mechanical Legend (DWG, 179KB)
- Mechanical Legend (PDF, 679KB)
- Plumbing Legend 1 (DWG, 133KB)
- Plumbing Legend 1 (PDF, 737KB)
- Plumbing Legend 2 (DWG, 86KB)
- Plumbing Legend 2 (PDF, 693KB)
- LAYERS
- All LAYERS files (ZIP, 47KB)
- ALl (CSV, 18 KB)
- ArchLvl (CSV, 20 KB)
- Civil (CSV, 31 KB)
- Electrical (CSV, 15 KB)
- Fire (CSV, 7 KB)
- General (CSV, 6 KB)
- Hvac (CSV, 13 KB)
- Instrumentation (CSV, 11 KB)
- Land (CSV, 5 KB)
- Plumbing (CSV, 16 KB)
- Structural (CSV, 24 KB)
- Telecommunications (CSV, 8 KB)
- WasteWater (CSV, 12 KB)
- Water (CSV, 12 KB)
- PENTABLES
- SYMBOLS
- All SYMBOLS files (ZIP, 2.93 MB)
- CIVIL
| All CIVIL Files (ZIP, 301 KB) |
ACP (DWG, 13 KB) |
AHR (DWG, 23 KB) |
| AIRPORT_ARROW (DWG, 5 KB) |
AIRPORT_DIST_MKR_1 (DWG, 6 KB) |
AIRPORT_DIST_MKR_2 (DWG, 5 KB) |
| AIRPORT_DIST_MKR_3 (DWG, 5 KB) |
AIRPORT_DIST_MKR_4 (DWG, 5 KB) |
AIRPORT_DIST_MKR_5 (DWG, 5 KB) |
| AIRPORT_HOLDING_LINE (DWG, 5 KB) |
AIRPORT_RETROFLECTIVE_MKR (DWG, 5 KB) |
AIRPORT_RWY_CLOSURE (DWG, 5 KB) |
| AIRPORT_TWY_CLOS (DWG, 5 KB) |
BMARK (DWG, 5 KB) |
BORING (DWG, 5 KB) |
| BRUSH_LINE_LARGE (DWG, 23 KB) |
BRUSH_LINE_SMALL (DWG, 23 KB) |
CAP_BRASS (DWG, 6 KB) |
| CATBSN (DWG, 5 KB) |
CMHLX (DWG, 5 KB) |
CONC (DWG, 7 KB) |
| CORNER_SECTION (DWG, 6 KB) |
CULV_END (DWG, 5 KB) |
DEMO_AREA (DWG, 5 KB) |
| DISPLACED_THRESHOLD (DWG, 29 KB) |
EHHLN (DWG, 5 KB) |
EMHLN (DWG, 5 KB) |
| GATE_DOUBLE (DWG, 19 KB) |
GATE_SINGLE (DWG, 19 KB) |
GRADE_EXISTING (DWG, 5 KB) |
| GRADE_FINISHED (DWG, 5 KB) |
GUARD_POST (DWG, 23 KB) |
HYDPU2 (DWG, 30 KB) |
| INLET_SPECIAL (DWG, 23 KB) |
JB (DWG, 25 KB) |
LABEL_BORING (DWG, 30 KB) |
| LIGHT (DWG, 23 KB) |
LIGHTPOST (DWG, 23 KB) |
LLABEL (DWG, 27 KB) |
| MAIL_BOX (DWG, 19 KB) |
MARSH (DWG, 24 KB) |
MKR_ROW (DWG, 5 KB) |
| OWNER_SAME (DWG, 19 KB) |
PC (DWG, 23 KB) |
PI (DWG, 23 KB) |
| PIEZOM (DWG, 23 KB) |
PIPE_IRON (DWG, 5 KB) |
PK_NAIL (DWG, 5 KB) |
| PL_MK (DWG, 19 KB) |
PLUG_LEAD (DWG, 5 KB) |
POINT (DWG, 28 KB) |
| POLE (DWG, 5 KB) |
POLE_POWER (DWG, 23 KB) |
POLE_TELEPHONE (DWG, 23 KB) |
| REIL (DWG, 5 KB) |
ROD (DWG, 5 KB) |
RRSWT (DWG, 23 KB) |
| RWCLL (DWG, 5 KB) |
SDMHOL (DWG, 5 KB) |
SPIRAL (DWG, 23 KB) |
| STATION_LABEL (DWG, 29 KB) |
SURVEY (DWG, 5 KB) |
TEST_PIT (DWG, 23 KB) |
| THL (DWG, 5 KB) |
TOWER_TRANSMISSION (DWG, 23 KB) |
TREEC (DWG, 5 KB) |
| TREED (DWG, 7 KB) |
TREEG (DWG, 5 KB) |
TREE-R (DWG, 29 KB) |
| TSOIL (DWG, 7 KB) |
TWCLL (DWG, 5 KB) |
TWGSGN (DWG, 5 KB) |
| VPC (DWG, 23 KB) |
VPI (DWG, 23 KB) |
WATER_LEV (DWG, 5 KB) |
| WAVES (DWG, 5 KB) |
WINDCN (DWG, 5 KB) |
|
- CORE
| All CORE Files (ZIP, 198 KB) |
abar (DWG, 31 KB) |
ADDEND (DWG, 30 KB) |
| ARROW (DWG, 5 KB) |
BRAKT (DWG, 6 KB) |
BREAK (DWG, 33 KB) |
| CH2M96 (DWG, 35 KB) |
CONC (DWG, 7 KB) |
DETAIL (DWG, 30 KB) |
| DIMARROW (DWG, 30 KB) |
DTLBUBBLE (DWG, 30 KB) |
DTLIND-2 (DWG, 30 KB) |
| DTLIND (DWG, 30 KB) |
EARTH (DWG, 7 KB) |
ebar (DWG, 32 KB) |
| ELEV (DWG, 6 KB) |
EQUIP (DWG, 30 KB) |
GRID (DWG, 6 KB) |
| GRID_NOTE (DWG, 30 KB) |
GROUT (DWG, 6 KB) |
LOOP (DWG, 53 KB) |
| MAGNOR (DWG, 6 KB) |
new_block (DWG, 14 KB) |
NORIND (DWG, 6 KB) |
| OVLDTL (DWG, 30 KB) |
PIPEBREAK (DWG, 6 KB) |
PIPEEND (DWG, 8 KB) |
| REVISN (DWG, 30 KB) |
ROCKS (DWG, 6 KB) |
SECIN_D (DWG, 30 KB) |
| SECIN_DB (DWG, 31 KB) |
SECIN_L (DWG, 30 KB) |
SECIN_LB (DWG, 30 KB) |
| SECIN_R (DWG, 30 KB) |
SECIN_RB (DWG, 30 KB) |
SECIN_U (DWG, 30 KB) |
| SECIN_UB (DWG, 30 KB) |
SLASH (DWG, 30 KB) |
SLOPE2 (DWG, 30 KB) |
| SLOPE (DWG, 6 KB) |
TAIL (DWG, 30 KB) |
|
- ELEC
| All CORE Files (DWG, 198 KB) |
All ELEC Files (ZIP, 606 KB) |
1DIR (DWG, 5 KB) |
| AMM_SW (DWG, 28 KB) |
ARROW (DWG, 28 KB) |
ARROW_1 (DWG, 28 KB) |
| BATTRY (DWG, 5 KB) |
C_DN (DWG, 5 KB) |
C_UP (DWG, 5 KB) |
| CAPCTR (DWG, 5 KB) |
CB (DWG, 28 KB) |
CB_3 (DWG, 5 KB) |
| CB_3POLE (DWG, 5 KB) |
CB_CLF (DWG, 29 KB) |
CB_DRAWOUT_AIR_LV (DWG, 6 KB) |
| CB_DRAWOUT_AIR_MV (DWG, 6 KB) |
CB_DRAWOUT_FUSED (DWG, 6 KB) |
CB_LOAD1 (DWG, 28 KB) |
| CB_LOAD2 (DWG, 28 KB) |
COIL_GENERIC (DWG, 5 KB) |
COMMUNICATION_STATION (DWG, 5 KB) |
| CONN_DELTA (DWG, 5 KB) |
CONN_DELTA_BROKEN (DWG, 5 KB) |
CONN_DELTA_WYE (DWG, 5 KB) |
| CONN_DELTA_WYE_G (DWG, 5 KB) |
CONN_DELTA_WYE_G_GFR (DWG, 6 KB) |
CONN_DELTA_WYE_G_RESISTOR (DWG, 6 KB) |
| CONN_PNT_A (DWG, 5 KB) |
CONN_PNT_B (DWG, 5 KB) |
CONN_PNT_C (DWG, 5 KB) |
| CONN_PNT_D (DWG, 5 KB) |
CONN_PNT_E (DWG, 30 KB) |
CONTACT_M_NC (DWG, 6 KB) |
| CONTACT_M_NO (DWG, 6 KB) |
CONTACT_M_NO_MC (DWG, 6 KB) |
CONTACT_MAGNETIC (DWG, 5 KB) |
| CONTROL_DEVICE (DWG, 5 KB) |
CONTROL_STATION (DWG, 28 KB) |
DETECTOR_AIRDUCT_IONIZATION (DWG, 28 KB) |
| DETECTOR_AUTOHEAT (DWG, 28 KB) |
DRAWOUT (DWG, 5 KB) |
EHHLN (DWG, 28 KB) |
| FA_BELL (DWG, 28 KB) |
FA_HORN (DWG, 28 KB) |
FA_HORNSTROBE (DWG, 28 KB) |
| FA_SMOKEDETECTOR (DWG, 28 KB) |
FA_STATION (DWG, 28 KB) |
FA_STROBE (DWG, 28 KB) |
| FUSE (DWG, 5 KB) |
FUSE_DRAWOUT 6 KB) |
GENERAL_BRACKET_AND_STUB (DWG, 5 KB) |
| GENERIC_SYMBOL (DWG, 5 KB) |
GENRTR (DWG, 5 KB) |
GFR (DWG, 5 KB) |
| GRDROD (DWG, 5 KB) |
GROUND2 (DWG, 5 KB) |
GROUND (DWG, 5 KB) |
| HRUN1 (DWG, 5 KB) |
JB (DWG, 25 KB) |
KA_RND (DWG, 28 KB) |
| L (DWG, 28 KB) |
LGT_EMBPR (DWG, 28 KB) |
LGT_EXIT (DWG, 6 KB) |
| LGT_EXIT_2SIDED (DWG, 7 KB) |
LGT_EXIT_DUAL_DIR (DWG, 5 KB) |
LGT_EXIT_SINGLE_DIR (DWG, 5 KB) |
| LGT_FLOUR_BAT (DWG, 28 KB) |
LGT_FLOUR_RECT (DWG, 28 KB) |
LGT_INDICATOR (DWG, 28 KB) |
| LGT_INDICATOR_PUSH_TST (DWG, 28 KB) |
LGT_RED_GREEN_PILOT (DWG, 28 KB) |
LUMINAIRE_RND (DWG, 28 KB) |
| LUMINAIRE_RND_AND_POLE (DWG, 28 KB) |
LUMINAIRE_SQ (DWG, 28 KB) |
LUMINAIRE_SQ_AND_POLE (DWG, 28 KB) |
| LUMINAIRE_WALLMT_RND (DWG, 28 KB) |
LUMINAIRE_WALLMT_SQ (DWG, 28 KB) |
MAGNETIC_CONTACTOR_COIL (DWG, 28 KB) |
| MAJOR_ELEC_DEVICE (DWG, 5 KB) |
MCC_BACK (DWG, 6 KB) |
MCC_CENTER (DWG, 6 KB) |
| METER_ETM (DWG, 28 KB) |
METER_VM_AM (DWG, 7 KB) |
METERING_FACILITY (DWG, 5 KB) |
| MOTOR (DWG, 5 KB) |
MOTOR_CNTRL_AM_OL (DWG, 7 KB) |
MOTOR_DC (DWG, 28 KB) |
| MOTOR_HP_INDICATED (DWG, 28 KB) |
OL_HEATER (DWG, 5 KB) |
PAGING_SPEAKER (DWG, 5 KB) |
| PAGING_SPEAKER_SURFACE_MT (DWG, 5 KB) |
PAGING_TRUMPET_INDOOR (DWG, 5 KB) |
PNL_1PH (DWG, 22 KB) |
| PNL_3PH (DWG, 24 KB) |
PNL_BRANCH_CKT (DWG, 6 KB) |
PNL_BRANCH_CKT_RECESSED (DWG, 6 KB) |
| PT (DWG, 5 KB) |
PT_FU (DWG, 28 KB) |
PT_WITH_VM (DWG, 29 KB) |
| PUSHBUTTON_C (DWG, 5 KB) |
PUSHBUTTON_O (DWG, 5 KB) |
RCPT_120V (DWG, 5 KB) |
| RCPT_240V (DWG, 5 KB) |
RCPT_CCTV (DWG, 5 KB) |
RCPT_COMPUTER_OUTLET (DWG, 7 KB) |
| RCPT_FLR (DWG, 5 KB) |
RCPT_MULTIPLE_ASSEMBLY (DWG, 5 KB) |
RCPT_PEDESTAL_MTD (DWG, 5 KB) |
| RCPT_QUADRUPLEX (DWG, 5 KB) |
RCPT_SPECIAL_PURPOSE (DWG, 5 KB) |
RCPT_TEL_DATA_WL (DWG, 5 KB) |
| RCPT_TEL_FLR (DWG, 5 KB) |
RCPT_TEL_WL (DWG, 5 KB) |
RELAY_CONTACT_NC (DWG, 5 KB) |
| RELAY_CONTACT_NO (DWG, 5 KB) |
REM_CONTACT_NC_INTERNAL_TB (DWG, 5 KB) |
REM_CONTACT_NC_REM_TB (DWG, 6 KB) |
| REM_CONTACT_NO_INTERNAL_TB (DWG, 5 KB) |
REM_CONTACT_NO_REM_TB (DWG, 6 KB) |
SA (DWG, 5 KB) |
| SECURITY_DEVICE (DWG, 5 KB) |
STARTER_120V (DWG, 6 KB) |
STARTER_480V (DWG, 7 KB) |
| STARTER_COMBINATION_MAGNETIC (DWG, 5 KB) |
STARTER_MAGNETIC (DWG, 5 KB) |
STARTER_MOTOR_2SPEED (DWG, 7 KB) |
| STARTER_MOTOR_FVNR (DWG, 28 KB) |
STARTER_MOTOR_FVNR_SPARE (DWG, 28 KB) |
STARTER_MOTOR_FVR (DWG, 7 KB) |
| STUB_AND_CAP (DWG, 5 KB) |
SW (DWG, 5 KB) |
SW_3_POLE (DWG, 5 KB) |
| SW_AS (DWG, 28 KB) |
SW_DRAWOUT_FU (DWG, 6 KB) |
SW_FUSED (DWG, 5 KB) |
| SW_OO_AUTO (DWG, 6 KB) |
SW_PUSHBUTTON_MECH_INTERLOCK (DWG, 6 KB) |
SW_SS (DWG, 6 KB) |
| SW_TDR_C_ON_TIMEOUT (DWG, 5 KB) |
SW_TDR_O_ON_TIMEOUT (DWG, 5 KB) |
SW_VM (DWG, 28 KB) |
| SW_WALL (DWG, 5 KB) |
SWIDIS (DWG, 5 KB) |
SWMULT (DWG, 5 KB) |
| SWSBRK (DWG, 5 KB) |
SWTDNC (DWG, 5 KB) |
SWTDNO (DWG, 5 KB) |
| tag2 (DWG, 26 KB) |
TAG (DWG, 28 KB) |
TAG_1 (DWG, 28 KB) |
| TJB (DWG, 5 KB) |
TWO_SPEED (DWG, 17 KB) |
UH (DWG, 6 KB) |
| UNIQUE_REFERENCE_POINT (DWG, 5 KB) |
VIDEO_CAMERA (DWG, 5 KB) |
VM_WITH_SW (DWG, 28 KB) |
| VOLUME_CONTROL (DWG, 5 KB) |
WALL_CLOCK (DWG, 5 KB) |
WIRE_1NO10 (DWG, 5 KB) |
| WIRE_1NO12 (DWG, 5 KB) |
WIRE_2NO10 (DWG, 5 KB) |
WIRE_2NO10G (DWG, 5 KB) |
| WIRE_2NO12 (DWG, 5 KB) |
WIRE_2NO12G (DWG, 5 KB) |
WIRE_3NO10 (DWG, 5 KB) |
| WIRE_3NO10G (DWG, 5 KB) |
WIRE_3NO12 (DWG, 5 KB) |
WIRE_3NO12G (DWG, 5 KB) |
| WIRE_4NO10 (DWG, 5 KB) |
WIRE_4NO10G (DWG, 5 KB) |
WIRE_4NO12 (DWG, 5 KB) |
| WIRE_4NO12G (DWG, 5 KB) |
WIRE_5NO10G (DWG, 5 KB) |
WIRE_5NO12G (DWG, 5 KB) |
| WYECON (DWG, 5 KB) |
WYEXGC (DWG, 5 KB) |
XFMR (DWG, 6 KB) |
| XFMR_CURRENT (DWG, 5 KB) |
|
|
- ISO
| All ISO Files (ZIP, 720 KB) |
ISO1 (DWG, 27 KB) |
ISO2 (DWG, 27 KB) |
| ISO3 (DWG, 33 KB) |
ISO4 (DWG, 33 KB) |
ISO5 (DWG, 31 KB) |
| ISO6 (DWG, 31 KB) |
ISO7 (DWG, 28 KB) |
ISO8 (DWG, 28 KB) |
| ISO9 (DWG, 33 KB) |
ISO10 (DWG, 33 KB) |
ISO11 (DWG, 28 KB) |
| ISO12 (DWG, 28 KB) |
ISO13 (DWG, 27 KB) |
ISO14 (DWG, 27 KB) |
| ISO15 (DWG, 27 KB) |
ISO16 (DWG, 27 KB) |
ISO17 (DWG, 27 KB) |
| ISO18 (DWG, 27 KB) |
ISO19 (DWG, 27 KB) |
ISO20 (DWG, 27 KB) |
| ISO21 (DWG, 27 KB) |
ISO22 (DWG, 27 KB) |
ISO23 (DWG, 27 KB) |
| ISO24 (DWG, 27 KB) |
ISO25 (DWG, 27 KB) |
ISO26 (DWG, 27 KB) |
| ISO27 (DWG, 27 KB) |
ISO28 (DWG, 27 KB) |
ISO29 (DWG, 27 KB) |
| ISO30 (DWG, 27 KB) |
ISO31 (DWG, 27 KB) |
ISO32 (DWG, 27 KB) |
| ISO33 (DWG, 27 KB) |
ISO34 (DWG, 28 KB) |
ISO35 (DWG, 28 KB) |
| ISO36 (DWG, 28 KB) |
ISO37 (DWG, 28 KB) |
ISO38 (DWG, 27 KB) |
| ISO39 (DWG, 27 KB) |
ISO40 (DWG, 27 KB) |
ISO41 (DWG, 27 KB) |
| ISO42 (DWG, 27 KB) |
ISO43 (DWG, 27 KB) |
ISO44 (DWG, 27 KB) |
| ISO45 (DWG, 27 KB) |
ISO46 (DWG, 29 KB) |
ISO47 (DWG, 29 KB) |
| ISO48 (DWG, 28 KB) |
ISO49 (DWG, 27 KB) |
ISO162 (DWG, 27 KB) |
| ISO163 (DWG, 27 KB) |
ISO164 (DWG, 27 KB) |
ISO165 (DWG, 27 KB) |
| ISO166 (DWG, 27 KB) |
ISO167 (DWG, 27 KB) |
ISO168 (DWG, 27 KB) |
| ISO169 (DWG, 27 KB) |
ISO170 (DWG, 27 KB) |
ISO171 (DWG, 27 KB) |
| ISO172 (DWG, 27 KB) |
ISO173 (DWG, 27 KB) |
ISO174 (DWG, 27 KB) |
| ISO175 (DWG, 27 KB) |
ISO176 (DWG, 27 KB) |
ISO177 (DWG, 27 KB) |
| ISO178 (DWG, 29 KB) |
ISO179 (DWG, 29 KB) |
ISO180 (DWG, 27 KB) |
| ISO181 (DWG, 27 KB) |
ISO182 (DWG, 27 KB) |
ISO183 (DWG, 27 KB) |
| ISO184 (DWG, 27 KB) |
ISO185 (DWG, 27 KB) |
ISO186 (DWG, 27 KB) |
| ISO187 (DWG, 29 KB) |
ISO188 (DWG, 30 KB) |
ISO190 (DWG, 27 KB) |
| ISO191 (DWG, 29 KB) |
ISO192 (DWG, 28 KB) |
ISO193 (DWG, 28 KB) |
| ISO194 (DWG, 44 KB) |
ISO195 (DWG, 46 KB) |
ISO196 (DWG, 27 KB) |
| ISO197 (DWG, 27 KB) |
ISO198 (DWG, 27 KB) |
ISO199 (DWG, 27 KB) |
| ISO200 (DWG, 27 KB) |
ISO201 (DWG, 27 KB) |
ISO202 (DWG, 27 KB) |
| ISO203 (DWG, 27 KB) |
ISO204 (DWG, 27 KB) |
ISO205 (DWG, 27 KB) |
| ISO206 (DWG, 27 KB) |
ISO207 (DWG, 27 KB) |
ISO208 (DWG, 27 KB) |
| ISO209 (DWG, 27 KB) |
ISO210 (DWG, 27 KB) |
ISO211 (DWG, 27 KB) |
| ISO212 (DWG, 27 KB) |
ISO213 (DWG, 27 KB) |
ISO214 (DWG, 27 KB) |
| ISO215 (DWG, 27 KB) |
ISO216 (DWG, 27 KB) |
ISO217 (DWG, 27 KB) |
| ISO218 (DWG, 28 KB) |
ISO219 (DWG, 33 KB) |
ISO220 (DWG, 33 KB) |
| ISO221 (DWG, 33 KB) |
ISO222 (DWG, 33 KB) |
ISO223 (DWG, 28 KB) |
| ISO224 (DWG, 27 KB) |
ISO225 (DWG, 27 KB) |
ISO226 (DWG, 27 KB) |
| ISO227 (DWG, 27 KB) |
ISO228 (DWG, 27 KB) |
ISO229 (DWG, 27 KB) |
| ISO230 (DWG, 27 KB) |
ISO231 (DWG, 27 KB) |
ISO232 (DWG, 27 KB) |
| ISO233 (DWG, 28 KB) |
ISO234 (DWG, 28 KB) |
ISO235 (DWG, 27 KB) |
| ISO236 (DWG, 27 KB) |
ISO237 (DWG, 29 KB) |
ISO238 (DWG, 28 KB) |
| ISO239 (DWG, 27 KB) |
ISO240 (DWG, 33 KB) |
ISO241 (DWG, 31 KB) |
| ISO242 (DWG, 27 KB) |
ISO243 (DWG, 27 KB) |
ISO244 (DWG, 27 KB) |
| ISO245 (DWG, 27 KB) |
ISO246 (DWG, 29 KB) |
ISO247 (DWG, 27 KB) |
| ISO248 (DWG, 27 KB) |
ISO249 (DWG, 27 KB) |
ISO250 (DWG, 29 KB) |
| ISO251 (DWG, 28 KB) |
ISO252 (DWG, 28 KB) |
ISO253 (DWG, 46 KB) |
| ISO254 (DWG, 44 KB) |
ISO255 (DWG, 27 KB) |
ISO256 (DWG, 27 KB) |
| ISO257 (DWG, 27 KB) |
ISO258 (DWG, 27 KB) |
ISO259 (DWG, 27 KB) |
| ISO260 (DWG, 28 KB) |
ISO261 (DWG, 28 KB) |
ISO262 (DWG, 28 KB) |
| ISO263 (DWG, 27 KB) |
ISO264 (DWG, 27 KB) |
ISO265 (DWG, 27 KB) |
| XISOLT (DWG, 27 KB) |
XISORT (DWG, 27 KB) |
|
- MECH
| All MECH Files (ZIP, 308 KB) |
1E1A02 (DWG, 6 KB) |
1E1A03 (DWG, 6 KB) |
| 1E1A04 (BAK, 6 KB) |
1E1A04 (DWG, 27 KB) |
1E1A05 (DWG, 6 KB) |
| 6Q1C01 (DWG, 6 KB) |
6Q1C06 (DWG, 6 KB) |
6Q1C08 (DWG, 6 KB) |
| 6Q1C11 (DWG, 6 KB) |
6Q1C16 (DWG, 6 KB) |
6Q1C21 (DWG, 6 KB) |
| 6Q1C22 (DWG, 6 KB) |
6Q1C26 (DWG, 6 KB) |
6Q1C30 (DWG, 6 KB) |
| 6Q1C32 (DWG, 6 KB) |
6Q1C37 (DWG, 6 KB) |
6Q1C38 (DWG, 6 KB) |
| 6Q1C56 (DWG, 6 KB) |
6Q1C77 (DWG, 6 KB) |
6Q1C78 (DWG, 5 KB) |
| 6Q1C90 (DWG, 6 KB) |
6Q1C91 (DWG, 6 KB) |
6Q6C51 (DWG, 6 KB) |
| 7P1E33 (DWG, 6 KB) |
7P2C01 (DWG, 6 KB) |
7P2C32 (DWG, 5 KB) |
| ABANDON_PIPE (DWG, 6 KB) |
ACTUATOR (DWG, 6 KB) |
ACTUATOR_AIR (BAK, 6 KB) |
| ACTUATOR_AIR (DWG, 27 KB) |
ACTUATOR_HOUSING (DWG, 6 KB) |
ACTUATOR_LEFT (DWG, 6 KB) |
| ACTUATOR_MANUAL (DWG, 6 KB) |
ACTUATOR_RIGHT (DWG, 6 KB) |
ANCHOR (DWG, 26 KB) |
| BEL_SPIG (DWG, 26 KB) |
CIRCUIT_HEAT_TRACING (DWG, 29 KB) |
CROSS_SIDE (DWG, 6 KB) |
| ELBOW_45_DOWN (DWG, 6 KB) |
ELBOW_45_SIDE (DWG, 26 KB) |
ELBOW_45_UP (DWG, 6 KB) |
| ELBOW_90_DOWN (DWG, 6 KB) |
ELBOW_90_LEFT (DWG, 6 KB) |
ELBOW_90_SIDE (DWG, 26 KB) |
| ELBOW_90_UP (DWG, 6 KB) |
EYEWASH (DWG, 6 KB) |
EYEWASH_SAFETYSHOWER (DWG, 28 KB) |
| FIRE_EXTINGUISHER (DWG, 26 KB) |
FIREEXT (DWG, 6 KB) |
FLANGE_DOUBLE (DWG, 6 KB) |
| FLANGE_GROOVE (DWG, 6 KB) |
FLANGE_MJ (DWG, 6 KB) |
FLANGE_SINGLE (DWG, 6 KB) |
| FLANGES (DWG, 26 KB) |
FLEXIBLE_PIPE_CONNECTION (DWG, 26 KB) |
FLOOR_CLEANOUT (DWG, 6 KB) |
| FLXCON (DWG, 6 KB) |
GATE_SLIDE (DWG, 6 KB) |
GATE_TELESCOPING (DWG, 6 KB) |
| GAUGE (DWG, 6 KB) |
GENERIC_BELLOWS_ELASTOMER (DWG, 6 KB) |
GENERIC_BELLOWS_STEEL (DWG, 6 KB) |
| GENERIC_CAP (DWG, 6 KB) |
GENERIC_COUPLING_FLANGED (DWG, 6 KB) |
GENERIC_COUPLING_FLEX (DWG, 6 KB) |
| GENERIC_COUPLING_FLEX_TIE (DWG, 6 KB) |
GENERIC_UNION (DWG, 6 KB) |
HOSE_RACK (DWG, 6 KB) |
| HUB_DRAIN (DWG, 6 KB) |
INSTRUMENT_AIR (DWG, 6 KB) |
INSULATION_HEAT_TRACING (DWG, 29 KB) |
| JB (DWG, 25 KB) |
ORIFICE (DWG, 6 KB) |
P00S (DWG, 6 KB) |
| P22N (DWG, 6 KB) |
P45N (DWG, 7 KB) |
P90N (DWG, 8 KB) |
| PRESSURE_SETTING (DWG, 6 KB) |
PRESSURE_SWITCH (DWG, 28 KB) |
REDUCER_CONCENTRIC (DWG, 6 KB) |
| REDUCER_ECCENTRIC (DWG, 6 KB) |
ROTAMETER (DWG, 6 KB) |
SAFETYSHOWER (DWG, 28 KB) |
| SIGHT_GLASS (DWG, 6 KB) |
TAG_SAMPLE (DWG, 28 KB) |
TEE_DOWN (DWG, 6 KB) |
| TEE_SIDE (DWG, 6 KB) |
TEE_UP (DWG, 6 KB) |
THERMOMETER (DWG, 6 KB) |
| THERMOMETER_HEAT_TRACING (DWG, 28 KB) |
THERMOSTAT_AMBIENT (DWG, 28 KB) |
THERMOSTAT_PIPE (DWG, 28 KB) |
| VALVE_HOSE (DWG, 26 KB) |
WYE_SIDE (DWG, 6 KB) |
WYE_UP (DWG, 6 KB) |
- PID
| All PID Files (ZIP, 634 KB) |
1D4A05 (DWG, 6 KB) |
1D4A14 (DWG, 6 KB) |
| 1D4A17 (DWG, 6 KB) |
1D4A20 (DWG, 5 KB) |
1D4A24 (DWG, 6 KB) |
| 1D4A30 (DWG, 6 KB) |
1D4A38 (DWG, 6 KB) |
1D4A42 (DWG, 6 KB) |
| 1D4A50 (DWG, 6 KB) |
1D4A51 (DWG, 6 KB) |
1D4A52 (DWG, 6 KB) |
| 1D4B05 (DWG, 6 KB) |
1D4B50 (DWG, 6 KB) |
1D4L21 (DWG, 6 KB) |
| 1D4N01 (DWG, 6 KB) |
1D4P27 (DWG, 7 KB) |
1D4P31 (DWG, 7 KB) |
| 1D4P43 (DWG, 6 KB) |
1D4Z03 (DWG, 6 KB) |
1D4Z20 (DWG, 6 KB) |
| 1D4Z21 (DWG, 6 KB) |
1E1A01 (DWG, 6 KB) |
1E1A02 (DWG, 53 KB) |
| 1E1A03 (DWG, 6 KB) |
1E1A04 (DWG, 6 KB) |
1E1A05 (DWG, 6 KB) |
| 1E1A08 (DWG, 5 KB) |
2_3X6_IND_CTRL (DWG, 6 KB) |
3X6_IND_CTRL (DWG, 6 KB) |
| 6P6C01 (DWG, 6 KB) |
6Q1C01 (DWG, 6 KB) |
6Q1C05 (DWG, 6 KB) |
| 6Q1C06 (DWG, 6 KB) |
6Q1C10 (DWG, 6 KB) |
6Q1C11 (DWG, 6 KB) |
| 6Q1C16 (DWG, 6 KB) |
6Q1C21 (DWG, 6 KB) |
6Q1C22 (DWG, 6 KB) |
| 6Q1C26 (DWG, 6 KB) |
6Q1C30 (DWG, 6 KB) |
6Q1C32 (DWG, 6 KB) |
| 6Q1C37 (DWG, 6 KB) |
6Q1C38 (DWG, 6 KB) |
6Q1C50 (DWG, 6 KB) |
| 6Q1C56 (DWG, 6 KB) |
6Q1C77 (DWG, 6 KB) |
6Q1C78 (DWG, 5 KB) |
| 6Q1C90 (DWG, 6 KB) |
6Q1C91 (DWG, 6 KB) |
6Q1C94 (DWG, 6 KB) |
| 6Q2C01 (DWG, 6 KB) |
6Q2C21 (DWG, 6 KB) |
6Q6C01 (DWG, 6 KB) |
| 6Q6C02_AP (DWG, 27 KB) |
6Q6C02_F (DWG, 27 KB) |
6Q6C02_S (DWG, 27 KB) |
| 6Q6C02_WP (DWG, 27 KB) |
6Q6C51 (DWG, 6 KB) |
6Q6C53 (DWG, 6 KB) |
| 6Q6C81 (DWG, 6 KB) |
6Q6C90 (DWG, 6 KB) |
6R9A01 (DWG, 6 KB) |
| 6R9A03 (DWG, 6 KB) |
6R9A04 (DWG, 6 KB) |
6R9G01 (DWG, 6 KB) |
| 6R9G06 (DWG, 6 KB) |
7P1E33 (DWG, 6 KB) |
7P1E36 (DWG, 6 KB) |
| 7P2C01 (DWG, 6 KB) |
7P2C32 (DWG, 5 KB) |
7P3C05 (DWG, 6 KB) |
| 7P3C13 (DWG, 6 KB) |
7P3C15 (DWG, 6 KB) |
7P3C22 (DWG, 6 KB) |
| 7P3C35 (DWG, 6 KB) |
7P3C37 (DWG, 6 KB) |
7P3C39 (DWG, 6 KB) |
| 7P3C41 (DWG, 6 KB) |
7P3C57 (DWG, 6 KB) |
7P3C59 (DWG, 6 KB) |
| 7P3C60 (DWG, 6 KB) |
7P3C61 (DWG, 6 KB) |
7P3D01 (DWG, 6 KB) |
| 7Q4C01 (DWG, 6 KB) |
7Q4D27 (DWG, 6 KB) |
7Q4D53 (DWG, 6 KB) |
| 7Q4D57 (DWG, 29 KB) |
7Q4D65 (DWG, 29 KB) |
7Q4D70 (DWG, 29 KB) |
| 7Q4D73 (DWG, 6 KB) |
7Q4D85 (DWG, 29 KB) |
7Q5A01 (DWG, 6 KB) |
| 7Q5A03 (DWG, 29 KB) |
7Q5A04 (DWG, 29 KB) |
7Q5A09 (DWG, 29 KB) |
| 7Q5A31 (DWG, 6 KB) |
7Q5A40 (DWG, 6 KB) |
7Q5A41 (DWG, 6 KB) |
| 7Q5A50 (DWG, 6 KB) |
7Q5A51 (DWG, 6 KB) |
7R9G02 (DWG, 6 KB) |
| 7R9G06 (DWG, 6 KB) |
7T3J10 (DWG, 5 KB) |
7T3R02 (DWG, 6 KB) |
| 7T3R03 (DWG, 6 KB) |
7T3R06 (DWG, 5 KB) |
7T3R12 (DWG, 6 KB) |
| 7T3R20 (DWG, 6 KB) |
7T3R24 (DWG, 6 KB) |
7T3R60 (DWG, 6 KB) |
| 7T3R61 (DWG, 6 KB) |
7T5L02 (DWG, 6 KB) |
7T7C02 (DWG, 6 KB) |
| 7T7D03 (DWG, 6 KB) |
act_man (DWG, 5 KB) |
AIR_FILT (DWG, 6 KB) |
| ANCHOR_BOLT (DWG, 6 KB) |
ARR_BYP_BL (DWG, 6 KB) |
ARR_BYP_PT (DWG, 5 KB) |
| ARR_PRI_BL (DWG, 5 KB) |
ARR_PRI_PT (DWG, 5 KB) |
ARR_PWR_SUP (DWG, 6 KB) |
| ARR_SEC_BL (DWG, 5 KB) |
ARR_SEC_PT (DWG, 5 KB) |
ARR_SIG (DWG, 5 KB) |
| ARR_SIG_BRK (DWG, 6 KB) |
ARR_SIG_CON_DOT (DWG, 5 KB) |
ARR_SIG_DOT (DWG, 6 KB) |
| ARR_SIG_MULT_1 (DWG, 6 KB) |
ARR_SIG_MULT_2 (DWG, 6 KB) |
ARR_SIG_MULT_3 (DWG, 6 KB) |
| ARR_SIG_MULT_4 (DWG, 6 KB) |
ARR_SIG_MULT_5 (DWG, 6 KB) |
BAR_SCREEN (DWG, 6 KB) |
| BELT_SHAKER (DWG, 6 KB) |
CMB_OILTGHT (DWG, 6 KB) |
CMB_OILTGHT_DBL (DWG, 6 KB) |
| CRT_PROG (DWG, 6 KB) |
DCU (DWG, 6 KB) |
DCU_2 (DWG, 6 KB) |
| DEWATERING_GRINDER (DWG, 6 KB) |
DIFF_FINE_BUBB_AIR (DWG, 6 KB) |
DRV_DISK (DWG, 6 KB) |
| DRV_MAG_TAPE (DWG, 6 KB) |
ELEC_RADIO_ANT (DWG, 6 KB) |
ELEMENT (DWG, 6 KB) |
| FINE_TUBE_AFTERCOOL (DWG, 6 KB) |
IGNITER (DWG, 6 KB) |
INST_CIR_FILL_DIA (DWG, 5 KB) |
| INST_FILL_DIA (DWG, 6 KB) |
INST_FILLED (DWG, 26 KB) |
INST_HYDRAULIC (DWG, 26 KB) |
| INST_OPEN_DIA (DWG, 6 KB) |
INST_PNEU (DWG, 6 KB) |
INT_SPEC_COMP_CONN (DWG, 6 KB) |
| LIFTING_EYE (DWG, 6 KB) |
LOGIC_NOT_CIR (DWG, 5 KB) |
LOGIC_OR (DWG, 6 KB) |
| LOGIC_RELAY (DWG, 6 KB) |
LT_2_2IN_SQ (DWG, 6 KB) |
LT_2AND1OILTGHT (DWG, 6 KB) |
| LT_2AND2OILTGHT (DWG, 6 KB) |
LT_3_1PT5SQ_PB (DWG, 6 KB) |
LT_3_2IN_SQ (DWG, 6 KB) |
| LT_3_2IN_SQ_COL (DWG, 6 KB) |
LT_6_1PT5SQ_PB (DWG, 6 KB) |
LT_6_2IN_SQ_DBL (DWG, 6 KB) |
| METER_ROT_GEAR (DWG, 6 KB) |
MISC_WATER_SURF (DWG, 6 KB) |
MOIST_SEP_ASSY (DWG, 6 KB) |
| MOIST_SEPARATE (DWG, 6 KB) |
P_AXIAL_FLOW_MIX (DWG, 6 KB) |
P_CENT_WETPIT-SEC (DWG, 6 KB) |
| P_TURB (DWG, 6 KB) |
P_VERT_TURB_WETPIT (DWG, 6 KB) |
PB_3OILTGHT (DWG, 6 KB) |
| PB_6OILTGHT (DWG, 6 KB) |
PB_ACT_TEST (DWG, 5 KB) |
PB_LT_3OILTGHT (DWG, 6 KB) |
| PB_LT_OILTGHT (DWG, 6 KB) |
PB-ACK_RST_TXT (DWG, 5 KB) |
pc_bellows_steel (DWG, 6 KB) |
| PC_FLEX_CONN (DWG, 6 KB) |
PC_SED_TRAP (DWG, 6 KB) |
PLATE_FR_HEAT_EXCH (DWG, 7 KB) |
| PLTR_XY (DWG, 6 KB) |
PNL_DR_CLAMP (DWG, 6 KB) |
PNL_HNDL_FRONT (DWG, 6 KB) |
| PNL_HNDL_SIDE (DWG, 6 KB) |
PNL_MTG_FT_BOT (DWG, 6 KB) |
PNL_MTG_FT_TOP (DWG, 6 KB) |
| PNL_NMPL (DWG, 6 KB) |
PRNT_ALRM_STAT (DWG, 6 KB) |
PRNT_LINE (DWG, 6 KB) |
| REGEN_DESCT_AIRDRY (DWG, 6 KB) |
SILENCE_INLET_FILT (DWG, 8 KB) |
SLUDGE_GRINDER (DWG, 6 KB) |
| SLUDGE_SCREEN (DWG, 6 KB) |
TANK_AIR_RECEIVE (DWG, 6 KB) |
TRUCK_DUMP (DWG, 8 KB) |
| v_backfire (DWG, 7 KB) |
v_spec_segs (DWG, 6 KB) |
VIDEO_COPIER (DWG, 6 KB) |
| WATER_HEATER (DWG, 6 KB) |
WDW_2_3X6_ (DWG, 6 KB) |
WDW_3_3X6 (DWG, 6 KB) |
| WND_4PT5IN_SQ (DWG, 6 KB) |
WND_ANNUN (DWG, 6 KB) |
|
- STRUCT
| STRUCT (ZIP, 237 KB) |
ANCH_BOLT (DWG, 6 KB) |
ANCH_BOLT_EXP (DWG, 6 KB) |
| ARROW (DWG, 5 KB) |
BLTWSH (DWG, 6 KB) |
BOLT_HEX_PLAN (DWG, 5 KB) |
| BOLT_LAG (DWG, 6 KB) |
BOLT_WASHER_PLAN (DWG, 5 KB) |
DOOR_DBL_TYPE1 (DWG, 26 KB) |
| DOOR_DBL_TYPE2 (DWG, 26 KB) |
DOOR_DBL_TYPE3 (DWG, 26 KB) |
DOOR_JAMB (DWG, 26 KB) |
| DOOR_LOUVER (DWG, 26 KB) |
DOOR_NUM_1 (DWG, 26 KB) |
DOOR_NUM_2 (DWG, 26 KB) |
| DOOR_OVERHEAD (DWG, 26 KB) |
DOOR_SINGLE (DWG, 26 KB) |
EL_MARKER (DWG, 6 KB) |
| ELEV_NUM (DWG, 26 KB) |
FLR_DRAIN (DWG, 5 KB) |
HANDRAIL_CTR_2 (DWG, 26 KB) |
| HANDRAIL_CTR_3 (DWG, 27 KB) |
HANDRAIL_L_2 (DWG, 26 KB) |
HANDRAIL_L_3 (DWG, 26 KB) |
| HANDRAIL_PLAN (DWG, 5 KB) |
HANDRAIL_R_2 (DWG, 26 KB) |
HANDRAIL_R_3 (DWG, 26 KB) |
| KEY_NOTE (DWG, 26 KB) |
LADDER (DWG, 5 KB) |
NUT_AND_THRD_BOLT (DWG, 6 KB) |
| NUT_HEX_EL (DWG, 6 KB) |
NUT_HEX_PLAN (DWG, 5 KB) |
PRECAST_PANEL (DWG, 26 KB) |
| REBAR_DOT_E (DWG, 30 KB) |
REBAR_DOT_M (DWG, 26 KB) |
REBAR_SECT (DWG, 5 KB) |
| ROOM_NO_LARGE (DWG, 26 KB) |
ROOM_NO_SMALL (DWG, 26 KB) |
SIGN_ID_NUM (DWG, 26 KB) |
| SINK_16X12 (DWG, 26 KB) |
SINK_20X16 (DWG, 26 KB) |
TARGET (DWG, 26 KB) |
| THRD_FRONT (DWG, 7 KB) |
THRD_SIDE (DWG, 7 KB) |
TOILET_FLOOR (DWG, 26 KB) |
| TOILET_TANK (DWG, 26 KB) |
TOILET_WALL (DWG, 27 KB) |
URINAL_FLOOR (DWG, 26 KB) |
| URINAL_WALL (DWG, 26 KB) |
WALL_TYPE (DWG, 26 KB) |
WATERSTOP (DWG, 28 KB) |
| WELD_ALL_AROUND (DWG, 5 KB) |
WELD_BEAD (DWG, 5 KB) |
WELD_BEVEL (DWG, 5 KB) |
| WELD_CONVEX (DWG, 5 KB) |
WELD_DBL_BEVEL (DWG, 5 KB) |
WELD_DBL_FILLET (DWG, 5 KB) |
| WELD_DBL_GROOVE_FLARE (DWG, 5 KB) |
WELD_DBL_J (DWG, 5 KB) |
WELD_DBL_SQUARE (DWG, 5 KB) |
| WELD_DBL_U (DWG, 5 KB) |
WELD_DBL_V (DWG, 5 KB) |
WELD_FIELD (DWG, 5 KB) |
| WELD_FILLET (DWG, 5 KB) |
WELD_FLUSH (DWG, 5 KB) |
WELD_GROOVE_FLARE (DWG, 5 KB) |
| WELD_J (DWG, 5 KB) |
WELD_PLUG_OR_SLOT (DWG, 5 KB) |
WELD_SECT (DWG, 5 KB) |
| WELD_SQUARE (DWG, 5 KB) |
WELD_TAIL (DWG, 5 KB) |
WELD_U (DWG, 5 KB) |
| WELD_V (DWG, 5 KB) |
WINDOW (DWG, 26 KB) |
|
- TEMPLATES
- Topographic Surveying Requirements, Revision 1, August 2009 (PDF, 98KB)
- Geotechnical Investigation Requirements, Revision 1, August 2009 (PDF, 157KB)
- Storage Tank Design Requirements, Revision 1, September 2009 (PDF, 133KB)
- Sewer Rehabilitation Design Guidelines, Revision 1, November 2008 (PDF, 100KB)
- Equipment and Instrument Tagging Requirements, Revision 1, August 2009 (PDF, 100KB)
- Right-of-Way Map/Real Estate Requirements, Rev 2, April 2010 (PDF, 120KB)
- Design Deliverables Checklist, Revision 0, September 2009 (PDF, 112KB)
- Master Specifications
- Sewer Specification List (PDF, 31KB)
- Section 801: Excavation, Backfilling, and Compaction for Sanitary Sewers (PDF, 44KB)
- Section 802: Gravity Sewer Pipe (PDF, 49KB)
- Section 803: Sewer Manholes (PDF, 31KB)
- Section 804: Sewer Force Mains (PDF, 52KB)
- Section 805: Submersible Wastewater Pump Station (PDF, 93KB)
- Section 806: Manhole Rehabilitation (PDF, 42KB)
- Section 807: Pump Station Rehabilitation (PDF, 25KB)
- Section 808: Cured-In-Place-Pipe(CIPP) (PDF, 78KB)
- Section 809: Cured-In-Place-Pipe(CIPP) Laterals (PDF, 30KB)
- Section 810: Slip Lining (PDF, 33KB)
- Section 811: Pipe Bursting (PDF, 29KB)
- Section 812: Sewer Line, Manhole and Wet Well Cleaning (PDF, 29KB)
- Section 813: Sewer Flow Control (PDF, 29KB)
- Section 814: Smoke Testing (PDF, 19KB)
- Section 815: Sewer Line, Manhole, and Wet Well Inspection (PDF, 38KB)
- Section 816: Dye-Water flooding (PDF, 16KB)
- Section 817: Jacked and Bored Pipe/Casing (PDF, 30KB)
- Section 818: Horizontal Directional Drilling for Sewers (PDF, 44KB)
- Section 819: Microtunneling and Pipe-Jacked Tunnels (PDF, 72KB)
- Section 820: Pump Station Demolition and Site Restoration (PDF, 23KB)
- Section 821: Misc Work and Cleanup (PDF, 21KB)
- Section 822: Protective Coating (PDF, 73KB)
- Section 903: Erosion Control (PDF, 34KB)
- Section 905: SPECIAL PROVISION: Traffic Control Supervisor (PDF, 30KB)
- Section 907: SPECIAL PROVISION: Concrete Curbs, Walks Drives and Incidental Paving (PDF, 35KB)
- Section 914: Pre-Construction Video (PDF, 21KB)
- Section 1011: SPECIAL PROVISION: Structural Metals (PDF, 13KB)
- Section 1016: Sewer Pipe (PDF, 43KB)
- Section 1017: SPECIAL PROVISION : Precast Concrete Sewer and Drain Units (PDF, 13KB)
- Section 1019: Valves-Appurtances (PDF, 74KB)
- Standard Plans
How Do I Become a Qualified Supplier?
Construction Guidelines Tools
Administrative/Management Tools
| |
